Owner's manual
Machine Variable Definitions 6-5
Table 6-2 Data Variables (continued)
Variable Name ID
Storage
Type
Description
DWVVALVE 409 U2
Valve used during Dispense Weight Verification:
1 = Valve 1
2 = Valve 2
3 = Valve 3
Valid only after collection event
“DispenseWeightComplete” occurs.
DWVTARGET 410 F8
Dispense Weight Verification target weight.
Valid only after collection event
“DispenseWeightComplete” occurs.
DWVTARGETRANGE 412 F8
Dispense Weight Verification Target Range: If range
limit checking is enabled, this variable will contain the
maximum allowable range for the dispense weight
verification routine. If limit checking is not enabled, this
variable will contain “-1”.
Valid only after collection event
DispenseWeightComplete” occurs.
DWVTARGETMINLIMIT 413 F8
Minimum allowable deviation from the target weight of
the dispense weight for the Dispense Weight Verification
routine.
Note that if the verification routine fails and the failed
weight is required, the data variable
“SCALEMEASUREMENT1” (if Valve 1) or
“SCALEMEASUREMENT2” (if Valve 2) will have the last
value read from the scale.
Valid only after collection event
“DispenseWeightComplete” occurs.
DWVTARGETMAXLIMIT 414 F8
Maximum allowable deviation from the target weight of
the dispense weight for the Dispense Weight Verification
routine.
Note that if the verification routine fails and the failed
weight is required, the data variable
“SCALEMEASUREMENT1” (if Valve 1) or
“SCALEMEASUREMENT2” (if Valve 2) will have the last
value read from the scale.
Valid only after collection event
“DispenseWeightComplete” occurs.