Owner's manual

SECS Message Detail 4-45
4.2.70 S6F13 - Annotated Event Report Send
S6F13 W * H<-E, Multiblock
<L [3]
<U4 DATAID> * DATAID
<U4 CEID> * Collection Event ID
<L
<L [2]
<U4 RPTID> * Report ID
<L
<L [2]
<U4 VID> * Variable ID
<V> * Variable Value
>
...
>
>
...
>
> .
NOTE This message is provided only for compatibility with older Host computers which
support older versions of GEM (refer to 1.9.3 GEM Configuration).
An Event Report will be sent if a Collection Event has occurred at the Equipment. The Host has enabled
Event Reporting for this CEID (refer to 4.2.36 S2F37 - Enable/Disable Event Report). The Host has set
the equipment constant “RpType” to “True” (annotated report format desired). The equipment constant
“ConfigEvents” has been set to 1.The Equipment sends one or more Event Reports which the Host has
previously linked to that CEID (refer to 4.2.34 S2F35 - Link Event Report)). Each report contains
specific Variables which the Host has previously defined for that Report (refer to 4.2.32 S2F33 - Define
Report).
The Equipment generates a value for DATAID to uniquely identify this Conversation. If S6F11 is
multiblock, the Equipment first sends the S6F5/S6F6 Inquire/Grant transaction, and the DATAID in
S6F11 will match DATAID in S6F5.