Owner's manual

4-42 SECS Message Detail
4.2.65 S6F6 - Multi-Block Grant
S6F6 * H->E
<B [1] GRANT6> . * GRANT6
The Host grants permission for the Equipment to send a multi-block Event Report.
Table 4-21 Multi-Block Event Values
GRANT6 Description
0x00 Normal. Permission granted.
Other
Permission not granted. The Equipment will not
send the following S6F3, S6F9, S6F11, or
S6F13, and will discard the data.
4.2.66 S6F9 - Event Report
NOTE This message is provided only for compatibility with older Host computers which do
not support GEM. (Refer to 1.9.3 GEM Configuration.)
S6F9 [W] * H<-E, Multiblock
<L [4]
<B [1] 00> * PFCD (always zero)
<U4 DATAID> * DATAID
<U4 CEID> * Collection Event ID
<L
<L [2]
<U4 DSID> * DSID=RPTID Report ID
<L
<V> * Variable Value
...
>
>
...
>
> .
If the equipment constant “ConfigEvents” is set to “0”, the Equipment sends S6F9 instead of the normal
S6F11 Event Report.
An Event Report will be sent if a Collection Event has occurred at the Equipment. The Host has enabled
Event Reporting for this CEID (refer to 4.2.36 S2F37 - Enable/Disable Event Report). The Host has set
the equipment constant “RpType” to “False” (normal report format desired). The Equipment sends one or
more Event Reports which the Host has previously linked to that CEID (refer to 4.2.34 S2F35 - Link
Event Report). Each report contains specific Variables which the Host has previously defined for that
Report (refer to 4.2.32 S2F33 - Define Report).