Owner's manual

4-36 SECS Message Detail
4.2.54 S5F7 - List Enabled Alarms Request
S5F7 W . * H->E
The Host requests the Equipment to send the current status of all Alarm IDs which are currently enabled
(refer to 4.2.50 S5F3 - Enable/Disable Alarm Send).
4.2.55 S5F8 - List Enabled Alarm Data
S5F8 * H<-E, Multiblock
<L
<L [3]
<B [1] ALCD> * ALCD - Alarm On/Off and
Severity Code
<U4 ALID> * Alarm ID
<A ALTX> * ALTX - Alarm Text
>
...
> .
The high-order bit of ALCD will be “1” if this alarm is currently On (Unsafe), or “0” if it is currently Off
(Safe). The low-order seven bits of ALCD contain the severity code for this alarm.
S5F8 contains only those ALIDs which are currently enabled for reporting (refer to 4.2.50 S5F3 -
Enable/Disable Alarm Send).
S5F8 reports alarms in order by Alarm ID.