Owner's manual

4-34 SECS Message Detail
4.2.50 S5F3 - Enable/Disable Alarm Send
S5F3 [W] * H->E
<L [2]
<B [1] ALED> * ALED - Alarm Enable/Disable
Code
<U4 ALID> * ALID - Alarm ID
> .
The Host commands the Equipment to enable or disable (depending on ALED) reporting for the
specified Alarm ID in S5F1, S5F8, S5F71, and S5F73.
Table 4-19 ALED Values
ALED Description
0x80 Enable sending alarm.
0x00 Disable sending alarm.
The following special format can be used to enable or disable all ALIDs.
S5F3 [W] * H->E
<L [2]
<B [1] ALED> * ALED - Alarm Enable/Disable
Code
<U4> * ALID - Alarm ID
> .
The Host may optionally set the W-Bit to “1” in S5F3. If so, the Equipment replies with S5F4.
4.2.51 S5F4 - Enable/Disable Alarm Acknowledge
S5F4 * H<-E
<B [1] ACKC5> . * ACKC5 - Acknowledge Code
Table 4-20 ACKC5 Values
ACKC5 Description
0x00 Normal. Everything correct.
0x01 Invalid ALID.