Owner's manual

4-22 SECS Message Detail
4.2.37 S2F38 - Enable/Disable Event Report Acknowledge
S2F38 * H<-E
<B [1] ERACK> . * ERACK - Acknowledge Code
Table 4-10 describes the ERACK values. Normally, ERACK is zero. Any non-zero ERACK indicates the
Equipment has rejected the entire S2F37 message.
Table 4-10 ERACK Values
ERACK Description
0x00 OK.
0x01 Denied. At least one CEID does not exist.
4.2.38 S2F39 - Multi-Block Inquire
S2F39 W * H->E
<L [2]
<U4 DATAID> * DATAID
<U4 DATALENGTH>
> .
The Host may send this Inquire/Grant transaction preceding any multiblock S2F33 or S2F35. For this
Equipment, this Inquire/Grant is optional. The Equipment accepts it, but ignores it, commits no
resources, and initiates no Conversation Timeout. The Equipment accepts multiblock S2F33 or S2F35
even if not preceded by the Inquire/Grant.
4.2.39 S2F40 - Multi-Block Grant
S2F40 * H<-E
<B [1] 00> . * GRANT
The Equipment always sends GRANT value “0”.