Manual

D-10 Appendix D – New Variables
Table D-4 Configuration Variables (cont.)
Variable Name ID SECS
Type
Storage Type FmConfig.ini Entry
Motion Controller (cont.)
c_EnableZTravelLimitChecking 6093 A[4] ASCII Enable Z Travel Limit Checking =
Purge Station
c_TimedPurge 6094 A[4] ASCII Timed Purge =
c_EnablePurgeBeforeResume 6095 A[4] ASCII Enable Purge Before Resume =
c_VacuumOutput 6096 I4 INT Vacuum Output =
Flow Rate Manager
c_FlowRate1 6097 A[30] FLT Flow Rate 1 =
c_DispenseWeightVerificationOutOfRange 6098 A[4] ASCII Dispense Weight Verification Out Of Range =
c_ValveAutoBiasOutOfRange 6099 A[4] ASCII Valve Auto Bias Out Of Range =
Scale Manager
c_ScaleType 6100 A[20] ASCII Scale Type =
c_Enabled 6101 A[4] ASCII Enabled =
c_ReadDelay 6102 A[30] FLT Read Delay =
c_ScaleUnits 6103 A[10] ASCII Units =
c_StabilityTimeout 6104 A[30] FLT Stability Timeout =
c_CheckScaleCup 6105 A[4] ASCII Check Scale Cup =
c_ScaleCupBit 6106 I4 INT Scale Cup Bit =
Conveyor Manager
c_NumberofConveyors 6107 I4 INT Number of Conveyors =
c_Jog1Dist 6108 A[30] FLT Jog1Dist =
c_Jog2Dist 6109 A[30] FLT Jog2Dist =
c_JogMaxDist 6110 A[30] FLT Jog Max Dist =