Manual

D-6 Appendix D – New Variables
Table D-4 Configuration Variables (cont.)
Variable Name ID SECS
Type
Storage Type FmConfig.ini Entry
Heater Manager (cont.)
c_EnabledPurgeBeforeResume 6014 A[4] ASCII Enabled Purge Before Resume =
c_EnableSkipWhileWaitingforTemp 6015 A[4] ASCII Enable Skip While Waiting for Temp =
c_TurnheatersoffwhenFmntexits 6016 A[4] ASCII Turn heaters off when Fmnt exits =
HEATER 1
c_Enabled_H1 6017 A[4] ASCII Enabled =
c_ControlType_H1 6018 A[20] ASCII Control Type =
Runtime Preferences
c_PreRunPurgeTime 6019 A[30] FLT Pre-Run Purge Time =
c_HomeZAxisatProd 6020 A[4] ASCII Home Z Axis at Prod. Start =
c_HomeAllAxesatProd 6021 A[4] ASCII Home All Axes at Prod. Start =
c_MovetoLocationatProd 6022 A[4] ASCII Move to Location at Prod. Start =
c_StartLocation 6023 A[30] ASCII Start Location =
c_EnableRunSetupForProduction 6025 A[4] ASCII Enable Run Setup For Production =
c_CheckSystemAirPressure 6026 A[4] ASCII Check System Air Pressure =
c_DispenseMotionTimeout 6027 I4 INT Dispense Motion Timeout =
c_DefaultMotionTimeout 6028 I4 INT Default Motion Timeout =
Default Post Run Park
c_MovetoFirstFidLocation 6029 A[4] ASCII Move to First Fid Location =
c_MoveToSystemLocation 6030 A[4] ASCII Move To System Location =
c_SystemLocationName 6031 A[30] ASCII System Location Name =
c_SetValveNumber 6032 I4 INT Set Valve Number =