Manual

D-2
Table D-2 Lot Level Variables (continued)
Variable Name
Data
Type
ID Storage
Type
Related
Collection
Description
SPHTR2CHAN1-
SPHTR2CHAN17
DV 1118
to
1134
F8 3003 Set Points for Heater 2
channels 1 to 17.
SPHTR3CHAN1-
SPHTR3CHAN17
DV 1135
to
1151
F8 3003 Set Points for Heater 3
channels 1 to 17.
SPHTR4CHAN1-
SPHTR4CHAN17
DV 1152
to
1168
F8 3003 Set Points for Heater 4
channels 1 to 17.
OFFSETHTR1CHAN1-
OFFSETHTR1C HAN17
DV 1201
to
1217
F8 3003 Offsets for Heater 1 channels 1
to 17.
OFFSETHTR2CHAN1-
OFFSETHTR2CHAN17
DV 1218
to
1234
F8 3003 Offsets for Heater 2 channels 1
to 17.
OFFSETHTR3CHAN1-
OFFSETHTR3CHAN17
DV 1235
to
1251
F8 3003 Offsets for Heater 3 channels 1
to 17.
OFFSETHTR4CHAN1-
OFFSETHTR4CHAN17
DV 1252
to
1268
F8 3003 Offsets for Heater 4 channels 1
to 17.
D.3 Carrier Level Variables
All variables in this table are defined as “Data Variables”.
There is some redundancy here to allow the station controller to collect the data real time as the fiducials
are found or by waiting until the board has been processed and collecting all of the data at once at the end
of the program.
Note that these variables will be overwritten each time a new board (carrier) is processed. The station
controller must collect the data immediately as each corresponding collection event occurs or create a
report containing the desired variables and attach the report to a collection event signaling processing of
the board is complete (such as “DispensingDone1” collection event 2002).