Manual

Appendix A – Data Dictionary Variables A-3
Table A-1 Data Dictionary Variables (continued)
VID Class Format Name and Description
26 SV U4
ALARMSERIAL
. The sequence number of the most recent alarm change
(going on or going off). This number starts at zero at power-up and
increments by one for each alarm transition which occurs.
27 SV A[16]
CLOCK
. The Equipment's current Date and Time in the following format:
YYYYMMDDhhmmsscc.
YYYY = year from 0000 to 9999
MM = month from 01 to 12
DD = day from 01 to 31
hh = hours from 00 to 59
mm = minutes from 00 to 59
ss = seconds from 00 to 59
cc = centiseconds from 00 to 99
28 SV U4
CONTROLSTATE
. The current Control State.
1 = Off-Line/Equipment Off-Line
2 = Off-Line/Attempt On-Line
3 = Off-Line/Host Off-Line
4 = On-Line/Local
5 = On-Line/Remote
30 SV List
EVENTSENABLED
. A list of all Events which are currently enabled.
Format as follows:
<L,n
1.<U4 CEID>
...
n.<U4 CEID>
>
31 SV A[6]
MDLN
. Model number. The format is a one to six letter, left-justified
acronym with blank fill on the right.
32 SV A[0..12]
PPEXECNAME
. The PPID of the currently selected Process Program.
This PPID is the DOS 8.3 file name of the recipe. It includes the
extension RCP.
33 SV U4
PREVIOUSCEID
. The CEID of the most recent Collection event which
has occurred.
34 SV A[0..9] PREVIOUSCOMMAND. The name of the most recent command.
35 SV U1
PREVIOUSCONTROLSTATE
. The Control State in effect before the
most recent transition to the current Control State.
1 = Off-Line/Equipment Off-Line
2 = Off-Line/Attempt On-Line
3 = Off-Line/Host Off-Line
4 = On-Line/Local
5 = On-Line/Remote