Owner's manual

System Configuration and Setup 4-41
4.3.10.6 Beacon Control
Beacon Configuration allows you to easily configure beacon and audible alarm states for various
FmXP/dispensing system operational conditions.
 NOTE An update to hardware logic may be required to utilize some of the beacon states.
To configure the desired beacon state and audible alarm:
1. In the Main Window, select
Configuration > Setup Runtime Preferences > Beacon
Control
.
 The Beacon Configuration window (Figure 4-41) opens. Table 4-6 describes the
features of the window.
Figure 4-41 Beacon Configuration Window (1 of 2)
2. Click on the desired tab to select one of the following categories: See Figure 4-42.
 Error Conditions
 Program States – 1
 Program States – 2
 Fluidmove States
3. Click the
Configure button next to the desired condition to display the Dispenser I/O
window where you can select the desired beacon state. See Figure 4-43.