Owner's manual

System Configuration and Setup 4-39
4.3.10.4.5 Logging E10 State Changes
1. In the Main Window, select
Configuration > Setup Logging > Setup Event Logging.
2. In the “Category” portion of the Event Manager window, use the scroll bar to find the desired
category button and click on it. Refer to 4.3.7.1 Setup Event Logging for additional
information.
3. In the “Events: Configuration” portion of the window, click on one or all of the E10 events.
See Figure 4-39 for a description.
 NOTE If you want to quickly enable all events, you can click on the Enable All button.
4. Click on
OK.
Event Description
E10 State Change
Logs changes in machine state. In the log file, these events are displayed in
the following format:
YYYY-MM-DD HH:MM:SEC:MSEC, E10 State Change, FROM State, TO
State, time spent in FROM state
E10 State Info
Logs additional E10 state information, other than state or substate changes.
In the log file, these events are displayed in the following format:
YYYY-MM-DD HH:MM:SEC:MSEC, E10 State Info, ITEM DESCRIPTION
E10 Substate Change
Logs substate changes. In the log file, these events are displayed in the
following format:
YYYY-MM-DD HH:MM:SEC:MSEC, E10 Substate Change, FROM
State/Substate Code, TO Substate Code
Figure 4-39 Event Manager