Owner's manual

System Configuration and Setup 4-35
4.3.10.4.3 Enabling the E10 Option
1. In the Main Window, select
Configuration > Setup Runtime Preferences >
E10 Equipment States
.
 The E10 Equipment States window (Figure 4-35) opens displaying the Configuration
tab.
2. In the E10 Equipment States window, click on the
Enable E10 Equipment States
check box.
 A checkmark in the box indicates this feature is enabled.
3. Click on
OK.
4. Exit and then restart FmXP.
Figure 4-35 Enabling E10 Equipment States Option