Owner's manual

System Configuration and Setup 4-31
Figure 4-29 Selecting a Fluid File for Valve Bias
6. Type in the name of the fluid file or select Browse to open the Fluid directory and choose
the fluid file from those available. We use a fluid file named “123.flu” for this example
(Figure 4-29).
7. Input the bias value and select
OK. The valve bias is established for specified valve/fluid
file combination.
8. In this example, the valve bias of -2% is established for the “dv7k-12345 / 123.flu”
combination.
Figure 4-30 Valve Bias LMO is Established