Owner's manual

4-30 System Configuration and Setup
2. Click on the Edit button to create a new Valve Bias.
 To use an already created Valve Identifier select it from the
Valve 1 (or 2) Identifier
drop-down list and click the
OK button to exit the LMO feature.
 The Local Machine Valve Bias Edit window opens (Figure 4-27).
Figure 4-27 Valve Bias Edit Window
3. Select a valve from the Valve Identifiers list or click the Add button to add a new valve to
the list.
4. Type in the new valve name and adjust the bias limits to establish the acceptable range.
 It’s a good idea to use a name that allows the user to easily indentify the valve.
 In this example the valve type “dv7k” and its serial number “12345” is used.
Figure 4-28 List of Fluid Files for Valve Bias
5. To add the fluid file and the bias click the Add button (Figure 4-28).