Owner's manual

4-28 System Configuration and Setup
g. Jog to align the crosshairs with the same WPO point used in the associated “.fmw”
program and click
Teach to establish the new WPO offset location.
 A message window opens prompting the user to set the new offset immediate use
(Figure 4-23).
Figure 4-23 Select Yes to Use the Workpiece Offset
3. Click on Done when finished.
To Teach an LMO – Height Sense Origin:
1. Click on the
Height Sense tab and select Enable Local Machine Height Sense.
Figure 4-24 Local Machine Offsets – Height Sense Tab
2. Click on the Teach button to create the new height sense location.
 The Edit Window opens (Figure 4-25).