Owner's manual

4-20 System Configuration and Setup
4.3.10 Runtime Preferences
Runtime Preferences allows you to select options affecting dispensing system behavior before, during,
and after production runs. These options include:
 Runtime Preferences
 Default Post Run Park Location
 Local Machine Offsets
 E10 Equipment States
 E116 Equipment States
 Beacon Control
 Monitored Inputs
 Pattern Library
 Calibrate Low Air Pressure Detect
 Flowmeter Configuration
 Electronic Pressure Control (E/P) Utility
 Image Capture
 Strip Mapping
4.3.10.1 Runtime Preferences
This feature allows you to establish various preferences for the start of a production run, between each
board during a production run, and to enable runtime setup options.
To set up runtime preferences:
1. In the Main Window, select
Configuration > Setup Runtime Preferences > Runtime
Preferences
.
 The Runtime Preferences window (Figure 4-15 and Figure 4-16) opens.
2. Select the desired options.
3. Click on
OK.