Owner's manual

4-16 System Configuration and Setup
4.3.8 Machine Offsets
Machine Offsets allows you to identify the type of Needle Sensor installed on your dispensing system and
choose the type of machine offsets routine you want to run.
When you select Machine Offsets from the Configuration Menu, a cascading menu with the following
options opens:
 Machine Offset Parameters  Valve Offsets
 Scripted Valve Offsets  Calculate Master Offsets
4.3.8.1 Machine Offsets Parameters
To establish Machine Offsets Parameters:
1. In the Main Window, select
Configuration > Machine Offsets > Machine Offsets
Parameters
.
 The Machine Offsets Parameters window (Figure 4-12) opens.
2. Select Machine Offsets Parameters as desired.
 Table 4-2 describes the available options.
Figure 4-12 Machine Offsets Parameters Window