Owner's manual

4-12 System Configuration and Setup
Command Description
Suppress Log File Creation
If checked, the creation of SPC log files is suppressed.
Enable SPC Logging
If checked, SPC logging is enabled.
Check Disk Space
During Production
If checked, disk space is verified during runtime using
the disk space configuration limits for Trc/Dbg logging.
Log Time
If checked, a time stamp is included in each log file.
Log Date
If checked, a date stamp is included in each log file.
Enable All Enables logging for all of the items in the Events list.
Disable All Disables logging for all of the items in the Events list.
Figure 4-7 Event Manager – Vision Category Selected
4.3.7.2 Setup Trc/Dbg Logging
The Trc/Dbg (Trace/Debug) Logging Option is a feature used mainly by service technicians for
troubleshooting purposes. The path from the Main Window is
Configuration > Setup Logging > Setup
Trc/Dbg Logging
. Click on OK to save the settings.
4.3.7.2.1 TRC and DBG Tabs
The TRC and DBG tabs (Figure 4-8) contain IDs that correspond to bits in FmXP. The description of
each bit is also shown in the window. Enable the ID you want to log by double-clicking on it, or
highlighting it and clicking the
Enable button. A check mark appears in the circle next to the ID to
signify that data for that feature will be logged to a file. Disable the ID by double clicking it, or
highlighting it and clicking the
Disable button.
 NOTE Log files can be viewed by any Windows-based text editor. It is recommended that you
periodically delete old files to avoid running out of disk space.