Owner's manual

4-8 System Configuration and Setup
Table 4-1 Feature Access
Group/Feature Group/Feature
Main Menu
Local Reservoir/PBFS IO Control
Teach a Program Fluid Manager
Edit Pre-Fiducial Block Valves
Tools Height Sensor
SECS/GEM Locations
Run a Program Purge Station
Start FmXP in Production Operation Level Scale
Exit FmXP Vision
Configuration Menu
Setup Workpiece Alignment
Select Language Setup Conveyors
Setup Units Inch Setup Scanner
Setup Units MM Setup PLC
Setup Units Machine Setup RFID
Set operation level – Production on idle Configuration Files
Runtime Preferences Feature Access
Check for Disabled Instructions Setup Password
Default Post-Run Park Location Automatic File Deletion
Local Machine Offsets Setup Machine Name
Enable Local Machine Workpiece Origin Setup Custom Log Output
Edit Local Machine Workpiece Origin Trc/Dbg Logging Options
Current Local Machine Workpiece Origin Setup Event Logging
Enable Local Machine Heater Offsets Setup Heaters
E10 - States Main Dialog Turn Heaters Off when FmXP Exits
E10 States - Lock/Unlock State Setup Dispenser Configuration
E10 States - Change State Setup Dispenser Test IO
E10 States - Reset Statistics Setup Dispenser Personality Parameters
E10 States - Configuration Setup Dispenser Keepout
Electronic Pressure Utility
Valve Offsets Menu
Edit Local Machine Heater Offsets Machine Offsets Parameters
Enable Local Machine Valve Bias Scripted Valve Offsets
Edit Local Machine Valve Bias Valve Offsets
Select Valve Identifiers Calculate Master Offsets
Valve Bias Controls Setup Scripts Options
Edit Local Machine Maintenance Preliminary Ndl to Cam (with Ndl finder)
Local Machine Offsets Maintenance Needle Finder Beam Calibration
Beacon Control Offsets – Needle Z
Monitored Inputs Prelim Needle to Camera XY Offset
Setup Pattern Library Offsets – Needle to camera (XY)
Image Capture Offsets – Needle to camera (XY) – no purge
Setup Low Air Detect Offsets – Camera to HS (XY)
Flowmeter Configuration Offset – Needle to Camera Dot Type