Owner's manual

System Configuration and Setup 4-7
4.3.6 Feature Access
Feature Access opens a window in which you can individually designate operator level access for all
FmXP features. The window is available to system and service level operators only, unless designated for
production operator use by a system or service level operator.
To set up feature access:
1. Select
Configuration from the Main Menu as shown in Figure 4-6.
2. Choose
Feature Access.
 See Table 4-1 for a list of features for which you may designate access levels.
 User access is accomplished by clicking on the associated box. If no check mark is
present, then access to that area is restricted.
3. After you have designated desired user access levels, click on
Close to close the window
and update the access levels.
Figure 4-6 Feature Access Setup