Owner's manual

System Configuration and Setup 4-5
4.3.4 Operation Level
This feature lets you restrict access to certain windows and menus based on password protection. There
are three levels of operation:
 Service - Allows access to all windows and all available features. Highest level of
operation.
 System - Allows full access to all windows and menus, but restricts access to certain
features.
 Production - Limits access to the Production Window, Run Window and production level
setup procedures only. The Production Level is the lowest level of operation and does not
require a password.
To set up operation level:
1. Select
Configuration from the Main Menu.
2. Choose
Change Operation Level.
 The Operation Level window (Figure 4-4) opens.
Figure 4-4 Changing Operation Level
3. Click on the desired operation level.
 Activating
Start Fluidmove in the Production operation level means that FmXP
automatically starts in the Production level of operation.
 Activating
Set operation level to Production when idle means that if FmXP remains
idle (no mouse or keyboard input) for the specified amount of time, FmXP
automatically returns to the Main Window and converts to the Production level of
operation.
4. Click on
OK.