Owner's manual

System Configuration and Setup 4-3
4.3.3 Touch Screen Friendly Display
If the system is configured with the touch screen option, this feature allows you to activate the Touch
Screen Friendly Display. A check mark in the box indicates that this feature is enabled.
To enable Touch Screen Friendly Display:
1. Select
Configuration from the Main Menu.
2. Choose
Touch Screen Friendly Display.
3. Click on
Enable Shortcut Panel.
4. Click on
OK when done.
Command Description
Enable Short Cut Panel Enables the Touch Screen Friendly Display Feature.
Properties
Opens a window that allows you to assign functions to
buttons in the Run Window. See Figure 4-2.
Use Run Window as
Start-up Window
Run Window will appear as the first window when
Fluidmove starts.
No Minimize, Restore and
Close buttons
The minimize, restore and close icons located in the
top right corner of the window will not appear. The
users will not be able to minimize, restore or close a
window.
Enable Large Selection List
Item Height
Make setup lists shown in Setup Window larger for
touch screen users.
Lowest…Highest
Pick a font size to be used in setup lists for touch
screen users.
Figure 4-1 Touch Screen Friendly Display