Owner's manual
Tour of Fluidmove 3-23
Table 3-5 Edit Window Options
Item Name Description
1 Message Line The Message Line prompts you through the set-up or programming steps.
2 Video Display
The Edit Window lets you see what the camera sees which is essential in
teaching fiducials and setup locations. Clicking on a location shown in the
Video Display moves the dispensing head and centers the camera
crosshairs on that point.
3
Task-Specific
Dialog Box
This area of the screen displays options and information related to the
particular task being taught. This area changes depending on the task.
4
Command
Buttons
Returns to the previous window.
Moves to the next window.
Saves a location in FmXP.
Accesses Online Help.
Closes the Edit Window and saves information.
Exits the Edit Window without saving information.
Opens another dialog box if more task-specific options
are available.
5
Dispensing
Elements
Toolbar
The Dispensing Elements Toolbar is only available when you select
Dispensing Elements from the Program Commands Toolbar in the
Programming Window (Figure 3-11). For more information about this
toolbar, refer to Section 6 - Beginning Programming.
6
Lighting Controls
Allows you to increase/decrease light levels and adjust red/blue color
levels (if available).
7
Jog (Position)
Controls
The position controls in the Edit Window are identical to those on the
control panel of certain dispensing systems. They are similar to those in
the FmXP Jog Window. Refer to 3.4.2 Jog Window.
• Click on the appropriate arrow to move in that direction.
• To move the dispensing head in the Z-axis, click on the Z-Axis
control checkbox.
• Click on the lightning bolt and then on one of the direction arrows
to rapidly move the dispensing head. Click again to turn it off.
NOTE The XYZ coordinates are displayed just below the
command buttons.
8
Target Box
The Target Box is a model of the entire dispensing area. It has crosshairs
that represents the current location of the dispensing head. You can move
the dispensing head by clicking in the Target Box.
Z-Axis
Checkbox