Owner's manual

Tour of Fluidmove 3-17
3.4.5.1 Programming Window Menu Bar
Each item on the menu bar activates a drop-down menu. Some drop-down menu selections open dialog
boxes. Drop-down menus and a brief explanation of each menu are shown in Figure 3-12. See Appendix A
for a detailed description of menu bar options.
NOTE Depending on system configuration and other factors, some menu items will not be
active. If a menu item is grayed-out, it is not available at the present time. Menu items
with an arrow () next to them have cascading submenus listing additional features.
File Edit Program Setup Run View Help
New Ctrl+N
Open…
Open CAD Import File…
Create Wafer Coater Pattern…
Save
Save As…
Fluid Table 
Recipe 
Barcode Association
PLC Recipe ID Association
Print… Ctrl+P
Print Preview
Print Setup…
Return to Main
Recent File
Cut Ctrl+X
Copy Ctrl+C
Paste Ctrl+V
Go To… Ctrl+V
Find Ctrl+F
Edit Main Program
Edit Pre Fiducial Block
Edit Procedure
Edit Pattern
Delete Procedure/Pattern
Edit Fiducial Info
Edit Pattern Skip Info…
Edit Substrate ID Info…
Edit Pattern Locations
Edit SECS/GEM Fid Control…
Realign Workpiece
Edit Dot Parameters
Edit Line Parameters
Edit Fluid Manager
Edit Program Options 
Dot
Line
Arc
Circle
Coat Dot
Coat Grid
Coat Line
Dot Grid
Rectangle
Pot
Area Fill 
Weight Control Line
Weight Control Grid
DJ Delta-Z Line
Step And Repeat
Comment
Log Comment
Enable/Disable Instruction
Height Sense 
Pattern 
Process Commands 
Time Commands 
Motion 
Send Commands 
Conveyor 
Library 
Set ZFast Mode 
Menu Description
File
The File menu contains all commands for creating new
programs, opening existing programs, and saving programs.
Edit
The Edit menu contains all commands for editing your
dispensing programs.
Program
The Program menu contains all commands for creating new
dispensing programs.
Figure 3-12 Programming Window Menu Bar (1 of 2)