Owner's manual

Tour of Fluidmove 3-15
3.4.4 Run Window
The Run Window provides the operator pertinent run information while running production. For detailed
information about using this window, refer to Section 8 – Running Production.
To access the Run Window:
1. In the Production Window, click on the
Run button.
2. Click on the
Run Production button.
 The Run Window (Figure 3-10) opens to the Run Status tab.
 Up to four tabs are present in this window depending on your system’s configuration.
 NOTE Clicking Run Production will not start the production run. To start the production run,
you must click on
Go in the Run Window.
Figure 3-10 Run Window
Optional Short
Cut Panel