Owner's manual

3-12 Tour of Fluidmove
3.4.2.6 Defining Locations
Defining locations makes it easier to move to commonly used locations.
To define locations:
1. Open the Jog Window. See 3.4.2.1 Opening/Closing the Jog Window.
2. Click on the
button.
 The Jog Configuration window opens.
3. Click on the
Locations tab (Figure 3-6).
Figure 3-6 Jog Configuration Window – Locations Tab
4. Click on the to select a location.
5. Enter the text to be displayed on the button in the Display column next to the location.
6. Click
OK when done.
 The Locations buttons in the Jog Window will be redefined (Figure 3-7).
Figure 3-7 Locations Buttons