Owner's manual

A-16 Appendix A - Programming Menu Detail
A.3 Program Commands Toolbar
Button Name Description
Dispensing
Elements
Opens a Teach Window from which you can select the
dispensing element you wish to program.
Comments
Opens a comments dialog box in for inserting a comment into
your program.
Disable/Enable
Instructions
Allows you to enable or disable selected lines of the currently
loaded dispensing program.
Send Command
If a specific program requires an ACL or PMAC command not
accessible from the menus or toolbars, you can create the
command by utilizing the Send ACL or Send PMAC
Command. This button opens a dialog box for inserting ACL
or PMAC commands directly into your program. M-600
Series Dispensing Systems use ACL commands for both the
Dispenser and the Conveyor. M-2000 Series Dispensing
Systems use ACL commands for the Conveyor only. The
Dispenser uses PMAC commands. X-1000 Series
Dispensing Systems use PMAC for both the Dispenser and
the Conveyor.
Pattern
Opens a drop-down menu containing all pattern-related
functions.
Process Inserts process commands into your program.
Procedure
Opens a drop-down menu containing all procedure-related
functions.
Motion Inserts motion commands into your program.
Timer
Opens a drop-down menu containing all timer-related
functions.
Conveyor
Allows you to choose Conveyor 1 or Conveyor 2. This is
available only on systems equipped with dual-lane
Conveyors.
Step and Repeat
Opens the Step and Repeat Teach Window. This feature
allows you to quickly and easily place the same pattern at
multiple locations on a single workpiece. Once you have
programmed the first pattern or dispensing element (a line, or
dot, etc.) and placed it at the first dispensing location on the
workpiece, you can use Step and Repeat to place the same
pattern at every other dispensing location on the board.