Owner's manual

Appendix A - Programming Menu Detail A-15
A.2 Process Toolbar
Button
Name Description
New Lets you create a new FmXP program.
Open Opens an existing program.
Save Saves the current program. All FmXP program files have a “.fmw” file extension.
Print Prints the current program.
Cut Cuts the selected program lines and copies them to the Window’s clipboard.
Copy Copies the selected program lines to the Window’s clipboard.
Paste Pastes information from the clipboard to your program at the cursor location.
Run Executes the current program.
Pause Pauses run at the end of the next command.
Stop Stops run after completion of current board.
Step
Program
Executes the current program one step at a time, stopping after each step to
allow you to check accuracy and to edit the program if necessary.
Abort Stops the run completely after executing last command.
Load Allows you to manually convey a board or part into the dispensing system.
Unload Allows you to manually convey a board or part out of the dispensing system.
Wet or
Dry Run
Mode
Toggle to select Wet (fluid dispensed) or Dry (no fluid dispensed) runs.
Home Moves Dispensing Head to the Home position.
Display
Video
Opens the Video Display Window, which provides a view of the entire dispensing
area while programming.
Purge Performs a purge command.
Measure
Flow
Rate
Performs a Flow Rate Measurement.
Jog Opens the Jog Control Window.
Help Accesses Online Help.
Return Returns to the Main Menu.