Owner's manual

A-14 Appendix A - Programming Menu Detail
Help
Help
Contents
Using Help
About Fluidmove…
Contents
Using Help
About Fluidmove…
Help
Help
Contents
Using Help
About Fluidmove…
Contents
Using Help
About Fluidmove…
A.1.6 View Menu
1. Log File - Opens the Event.Log file in Notepad so you
can review the performance of your dispensing system.
To setup an Event.Log file, see Setup Event Logging on
the Configuration Menu.
2. Trace File
- Opens the Trace file in Notepad so you can
review the performance of your dispensing system. To
setup a Trace file, see Trc/Dbg Logging Options on the
Configuration menu.
3. Dbg/Run Output File
- Opens the Debug file in Notepad
so you can review the performance of your dispensing
system. To setup a Dbg/Run Output file, see Trc/Dbg
Logging Options on the Configuration menu.
4. Toolbar
- Refers to the Process Toolbar. Deactivating Toolbar removes the Process Toolbar from
the screen. Activating Toolbar restores the Process Toolbar to the screen.
5. Infobar
- Refers to the Information Bar located just below the Process Toolbar. The Information
Bar contains the name of the currently loaded dispensing program, fluid file, and pattern name.
Deactivating Infobar removes the Information Bar from the screen. Activating Infobar restores the
Information Bar to the screen.
6. Jogbar
- Refers to the Jog Controls for moving the Dispensing Head and/or the Conveyor.
Activating the Jogbar opens the Jog Controls. Deactivating Jogbar closes the Jog controls.
7. Commandbar
- Refers to the Program Commands Toolbar located along the right edge of the
Programming Window. Deactivating Commandbar removes the Program Commands Toolbar from
the screen. Activating Commandbar restores the Programs Commands Toolbar to the screen.
8. Status Bar
- Activates and deactivates the bar at the bottom of the screen. The Status Bar may
contain important or useful information and explanations and it is recommended that you keep
it active.
9. Gem Status Bar
- Activates and deactivates the SECS/GEM status bar.
10. E/P Bar
- Toggles the Electronic Pressure (E/P) toolbar which displays the current regulator
readings.
11. Airflow Bar
- Displays or hides the heater airflow value window. This item is enabled only on
systems with the "Controlled Process Heat" (CpH) option installed.
12. Video
- Activates the video view screen.
A.1.7 Help Menu
1. Contents - Displays the contents of the help menu.
2. Using Help
- Provides Help Menu instructions.
3. About Fluidmove
- Opens a dialog box, which provides the
Fluidmove version number.
View
Log File
T
race File
Dbg/R
un Output File
T
oolbar
I
nfobar
J
ogbar
C
ommandbar
S
tatus Bar
G
em Status Bar
E/P Bar 
Airflow Bar 
V
ideo