Owner's manual

Tour of Fluidmove 3-11
3.4.2.5 Configuring the Jog Distance
Thought it is not recommended, the jog speed can be adjusted by changing the velocity and distance
settings. Consult Nordson ASYMTEK Technical Support before changing.
To configure the jog distance:
1. Open the Jog Window. See 3.4.2.1 Opening/Closing the Jog Window.
2. Click on the
button.
 The Jog Configuration Window opens (Figure 3-5).
Figure 3-5 Jog Configuration Window
3. Click on the appropriate tab (Dispenser XY, Dispenser Z, Conveyor) and enter the desired
jog and turbo jog settings
4. Click
OK when done.