Owner's manual

3-10 Tour of Fluidmove
3.4.2.4 Using the Keyboard to Move the Dispensing Head and Conveyor
On most dispensing systems, you can move the dispensing head or the conveyor with the keyboard. See
Table 3-4 for a list of keyboard commands that can be used at any time to move the dispensing head or
the conveyor.
Pressing the key combination once, will move the dispensing head or conveyor a short distance
(configurable distance). Press and hold down the key combination for a continuous move in that direction.
Movement speed is faster if the “Shift” key is included in the key combination.
 NOTE The device that will move is the one shown in the bottom right-hand corner of the
Production Window, Run Window, Programming Window, or Tools Window (Figure 3-9).
To select another device, open the Jog Window and select the desired radio button.
Table 3-4 Position Control Keyboard Commands
Speed of
Movement
Command
(1)
Conveyor
Response
Dispensing Head
Response
Ctrl + H Rear rail moves all the way
to the back of dispensing
chamber.
Moves to front left corner
of dispensing chamber.
Slow
(2)
Ctrl + ← Belts move left Moves left
Ctrl + ↑
Rear rail moves to back Moves backward
Ctrl + →
Belts move right Moves right
Ctrl + ↓
Rear rail moves to front Moves to front
Ctrl + Z + ↓
Moves downward
Ctrl + Z + ↑
Moves upward
Fast
(3)
Ctrl + Shift + ← Belts move left Moves left
Ctrl + Shift + ↑
Rear rail moves to back Moves backward
Ctrl + Shift + →
Belts move right Moves right
Ctrl + Shift + ↓
Rear rail moves to front Moves forward
Ctrl + Shift + Z + ↓
Moves downward
Ctrl + Shift + Z + ↑
Moves upward
Note: (1) Simultaneously press the keys shown.
(2) Slow is the same as clicking on a single arrow
in the Position Control dialog box.
(3) Fast has the same effect as clicking on a double arrow
in the Jog Window.