Owner's manual

Tour of Fluidmove 3-9
Table 3-3 Conveyor Jog Window Options
Item Name Description
1 Y-axis Controls
(move front/back)
Rear Rail Slow Backward (small increments)
Rear Rail Fast Backward (large increments)
Rear Rail Slow Forward (small increments)
Rear Rail Fast Forward (large increments).
2 X-axis Controls
(move left/right)
Belt Moves Slow Right (small increments)
Belt Moves Fast Right (large increments)
Belt Moves Slow Left (small increments)
Belt Moves Fast Left (large increments)
3 Conveyor
Radio Buttons
Click to activate the jog controls for Conveyor 1 or Conveyor 2 (if installed).
NOTE The selected jog device is indicated in the bottom right-hand
corner of all major windows. See Figure 3-9.
4
Click to open a dialog box where you can configure jog distance and speed.
5
Click to open a live video display showing a close-up view of the dispensing
area.
6
Click to access FmXP Online Help about this window.
7
Click to reinitialize the conveyor. Use this button if you are experiencing
communication problems with the conveyor.
8
Clicking on Home sends the conveyor rear rail to its “Home” position. The
home position is the extreme rear of the dispensing area.