Owner's manual

Tools 9-5
Figure 9-3 Heater Control Window
4. Click on On/Off to turn the channels on and off. Click on Help in any of the dialog boxes
for detailed explanations of all features and options. Click on
Exit to close the Heater
Control Window.
 NOTE Not every available heater loop will be connected to a functioning heater element. The
loop names are set at the Nordson ASYMTEK factory, but can be changed to fit your
specific requirements.
9.3.1.1.1 Loop Parameters
To display detailed information about a specific heater loop, double click the loop name. The Loop
Parameters dialog box (Figure 9-4) opens. The Loop Parameters dialog box contains six tabs. Click on the
tab to view its options.
• Main
• Run Time
• Heat Control
• Input
• Output
• Alarm
To close the Loop Parameters dialog box and save changes, click
OK. To close the Loop Parameters
dialog box without saving changes, click
Cancel. The Loop Parameters dialog box will close and you
will return to the Heater Control Window.