Owner's manual

8-10 Running Production
Along the right hand side of the Run Window are control buttons the operator uses to start, pause,
stop, or abort a production run. See Table 8-2. The operator may pause, stop, or abort a run anytime
during production.
 NOTE In addition to the Stop and Abort buttons in the Run Window, all Nordson ASYMTEK
Dispensing Systems are equipped with an Emergency Machine Off (EMO) button, which
the operator can quickly push to cut system power if the dispensing system or workpiece
is in danger of being damaged.
Table 8-2 Run Control Buttons
Item Description
Go
Starts the Production Run.
Pause
Pauses the Production Run.
Stop
Stops the Production Run after completing the current board.
Abort
Aborts the Production Run.
Indicates that SECS/GEM is communicating with the Host.
Help
Accesses Online Help.
Jog
Opens the Jog Window, which contains Position Controls for
moving the Dispensing Head and the Conveyor.
Return
Returns to the Production Window.
Depending upon system setup, the Run Window may contain one or more of the following tabs:
• Run Status
• Temperature
• SECS/GEM Interface
• Vision
• Scanner
• VVS Flowrate