Owner's manual

8-6 Running Production
To perform a Scripted Prompted Setup:
1. Select
Setup Scripts Options from the Configuration Menu.
2. Make sure
Use Setup Scripts is selected. If not, select it and click OK. Refer to Figure 8-2.
3. Make sure the work area is clear of any obstacles so the Dispensing Head does not collide
with anything when it moves.
4. Select
Run a Program from the Main Window.
 The Production Window opens. See Figure 8-5.
Figure 8-5 Production Window - Setup Menu
5.
Click on Setup and then on Setup Scripts.
 The Run Script Dialog Box opens. See Figure 8-6.
Figure 8-6 Run Script
6.
Click on Prompted Setup.
 Clicking on Syringe Change will launch a script specific to changing the fluid syringe.