Owner's manual

7-56 Advanced Programming
12. Move to the line above the weight control line just programmed.
13. Click on
Process button on the Programming Commands Toolbar.
14. Select
Set Valve Speed.
15. Enter
50.
 Your program should appear similar to the one in Figure 7-41.
Workpiece
VVS.fmw
1 SET VALVE SPEED: 50.00%; VALVE 1
2 WEIGHT CONTROL: 10.000, 1, …
3 END:
1
Workpiece
VVS.fmw
1 SET VALVE SPEED: 50.00%; VALVE 1
2 WEIGHT CONTROL: 10.000, 1, …
3 END:
1
Figure 7-41 Variable Valve Speed Program