Owner's manual

7-42 Advanced Programming
3. Define a location for each module by giving it a unique name and teaching the XY location
as follows:
a. Highlight the desired location in the Location Table (Figure 7-23).
b. Click on
Edit.
 The Edit Window (Figure 7-24) opens.
c. Use the position controls to move the camera crosshairs to the pattern origin location
and click
Teach.
 The taught location should be the same as the pattern origin.
d. Click on
Done.
 The Edit Window closes and you will return to the Location Table.
Figure 7-24 Defining a Module Location