Owner's manual

6-24 Beginning Programming
6.5.4 Advanced Dot Parameters
Item Description
Mid-Move 1
This parameter is an advanced dot parameters used for special
applications and testing. For more information, contact Nordson
ASYMTEK Application Engineering.
Mid-Move 2
This parameter is an advanced dot parameters used for special
applications and testing. For more information, contact Nordson
ASYMTEK Application Engineering.
On Vector Mode
This parameter is an advanced dot parameters used for special
applications and testing. For more information, contact Nordson
ASYMTEK Application Engineering.
Off Vector Mode
This parameter is an advanced dot parameters used for special
applications and testing. For more information, contact Nordson
ASYMTEK Application Engineering.
Post Dwell
Post Dwell is the amount of time in seconds that the dispensing head
remains in the XY position after retracting in the Z-axis (see Dwell
above). This parameter is available for use in Zfast Mode only and
should be used for fluids with a tendency to string. When used, the
total dwell time is the sum of both Dwell and Post Dwell.
Figure 6-15 Advanced Dot Parameters