Owner's manual

6-4 Beginning Programming

6.4.1 Dispensing Elements

There are several fundamental dispensing elements and patterns that form the foundation for all

dispensing applications. These include lines, dots, circles, rectangles, area fill, etc. When you select

Dispensing Elements from the Program Commands Toolbar, a Teach Window opens. The Teach

Window contains the Dispensing Elements toolbar (Figure 6-3). Select the desired Dispensing Element

by clicking on it. You will be then be prompted through the remainder of the programming process for the

dispensing element selected.

 NOTE Some Dispensing Elements are platform and valve specific and may not be available on

your particular system configuration.

Figure 6-3 Dispensing Elements Toolbar

Dot

Arc

Rectangle

Area Fill

Weight Control

Line

Find Substrate

Height

Select

Valve

Coat Dot

Coat Grid

Line

Circle

Pot

Spiral Fill

Weight Control Fill

Pattern

Coat Line

Dot Grid

Multipass

Delta Z Line