Owner's manual

5-24 Programming Basics and Setup
To Attach Script Files:
1. Click on the
Attach Script Files tab (if present). This tab will not appear if you are not
using script files for program setup.
2. Select the desired script file categories by clicking the check box to the left of the
"Prompted Setup," "Change Syringe," and/or "Low Fluid" button.
 Categories not selected will use the script files specified in "Setup Script Options" on
the Configuration menu.
3. Click on the desired category button and select the appropriate script file from the list. The
file name will appear in the text box under the button. See Figure 5-12.
Figure 5-12 Fluid Manager - Attach Script Files
 NOTE If the same fluid file is being used for both Valve 1 and Valve 2, the script files will be
the same for both valves.
To Close the Fluid Manager:
1. Click on one of the following buttons at the bottom of the dialog box to exit and return to
the Main Window:

OK allows usage of the settings, but will not save the settings to the fluid file.

Save saves the settings to the fluid file.

Cancel closes the dialog box and does not retain any of the new/changed settings.