Owner's manual

5-22 Programming Basics and Setup
To setup Pot Life/Low Fluid Check
 NOTE If Local Machine Offsets is active, the “Dispensed Weight Bias” parameter will be
labeled “Local Machine Valve Bias.”
1. Click on the
Pot Life/Low Fluid Check tab. See Figure 5-11.
 Enter the appropriate information regarding fluid pot life and low fluid check options.
 The options on this tab are described in Table 5-5.
Figure 5-11 Fluid Manager - Pot Life/Low Fluid Check
2. Click on one of the following buttons at the bottom of the dialog box to exit and return to
the Main Window:

OK allows usage of the settings, but will not save the settings to the fluid file.

Save saves the settings to the fluid file.

Cancel closes the dialog box and does not retain any of the new/changed settings.