Owner's manual

5-6 Programming Basics and Setup
When you access the Programming Window in FmXP, the last saved program opens. To create a new
program, select
File > New from the menu bar or click on the Program Wizard icon. You will be
prompted to define the workpiece origin, substrate height and fiducials. By default, when you create a
new program, a Workpiece Pattern opens. See Figure 5-2. Click on
to close the programming window
and return to the Main menu.
 NOTE See Exercise 5-1 for step-by- step instructions for creating a new program.
Item Description
1 Program Name
2 Fluid Filename
3 Pattern Name
4 Pattern End Command
Figure 5-2 Default Programming Window - Workpiece Pattern
1
3
4
2