Owner's manual

System Configuration and Setup 4-113
4.4.13 RFID Setup
FmXP supports RFID tags located on workpieces containing up to eight individual parts. FmXP reads the
tag prior to dispensing to determine which FmXP program should be loaded, which parts are valid, and to
ensure workpieces are being processed in the correct order. After the dispensing process is complete,
FmXP writes to the tag to indicate the success/failure status of each part and to note that dispensing has
been completed on the current machine.
To enable RFID:
1. In the Main Window, select
Configuration > Setup RFID.
 The RFID Controllers window (Figure 4-95) opens.
2. Click the
Enable checkbox at the top to activate RFID.
Button Description
Gateway
IP Address
IP address is a TCP/IP communication term. It represents the Gateway
ID in a network.
Port
A TCP/IP communication term. It is an unsigned integer. A
communication protocol usually determines the port number.
Syringe
Enable
Enable the RFID Reader to read syringe code.
Node ID
The syringe RFID reader ID.
Search Range in Y
The distance for syringe to travel from Home in Y direction.
Validation with be triggered
if door has been opened
for more than
When the door opening time is larger than this, Fluidmove will perform
a validation.
Perform Tests after OK is
clicked
The syringe will go to syringe RFID Reader location and read the code.
This feature may be used to test the syringe RFID Reader installation.
Figure 4-95 RFID Configuration Window