Owner's manual

System Configuration and Setup 4-111
Table 4-17 Setup Dispenser Options (Continued)
Command Description
Correction Table (PMAC
and ACL Plus)
Enabled
: - If checked, the correction table file data is applied to the
dispenser taught XY positions.
Disabled
: - If checked, the correction table file data is NOT applied to the
dispenser taught XY positions.
Data File Name
: - The name of the correction table file included on the
calibration disk.
Dispenser Files
Startup File Name
: Executes the chosen dispenser file at FmXP startup.
Pre-Board Run File Name
: Executes the chosen dispenser file before
dispensing begins.
At Reset File Name
: Executes the chosen dispenser file after resetting the
dispenser.
At Abort File Name
: Executes the chosen dispenser file when a program
has been aborted.
Change
: Choose the dispenser control file you want to execute during the
selected system condition.
Reinitialization
: Downloads the calibration file for the Dispenser Controller.