Owner's manual

System Configuration and Setup 4-109
4.4.12 Dispenser Setup
Setup Dispenser allows you to define dispensing head behavior and dispenser startup files.
WARNING! Default settings are established at the factory prior to shipping. DO NOT make
changes unless trained to do so. For more information, contact Nordson
ASYMTEK Technical Support.
4.4.12.1 Dispenser Configuration
To configure the dispenser:
1. In the Main Window, select
Configuration > Setup Dispenser > Setup Configuration.
 The applicable dispenser window opens (Spectrum Series systems use ACL Plus,
X-1000 and M-2000 Series systems use PMAC; Century and M-600 Series systems
use ACL). See Figure 4-93.
2. Select the desired options. Refer to Table 4-17 for descriptions.
 The user should not have to make changes unless the system is not working properly.
Contact Nordson ASYMTEK Technical Support for more information.
3. Click on OK.
Figure 4-93 Setup Dispenser Windows
Spectrum Series
Century/M-600
X-1000/M-2000