Owner's manual

System Configuration and Setup 4-93
Feature Description
Enable Automatic
Conveyor Width
If checked, automatic conveyor width will be enabled for the selected
conveyor.
Confirm Move Taught
Width
If checked, the operator is prompted to confirm conveyor width when any
program containing automatic conveyor width is loaded.
Set Global Default
Clearance
If checked, the system uses the default clearance settings for all programs
using the automatic conveyor width feature.
Runtime Motion Settings
Speed
– Specifies the travel velocity for conveyor width axis.
Accel
- Specifies the default Acceleration for conveyor width axis.
Calibrate Conveyor
Width
Opens dialog to automate travel setting parameters for this feature.
See Figure 4-80.
Figure 4-79 Automatic Conveyor Width Window