Owner's manual

4-92 System Configuration and Setup
4.4.9.1.1 Personality Parameters
Figure 4-78 Personality Parameters – Conveyor
4.4.9.1.2 Automatic Conveyor Width
Conveyor width is programmable. Programmed width is linked to a particular dispensing program. The
conveyor automatically adjusts to the programmed width when the associated program is loaded.
To setup Automatic Conveyor Width:
1. Click on
Setup in the Automatic Conveyor Width section of the Setup Conveyors Window
(Figure 4-76).
 The Automatic Conveyor Width window opens (Figure 4-79).
2. Click on the box next to
Enable automatic conveyor width. A checkmark in the box
indicates it is enabled.
3. Make desired selections and click
OK.