Owner's manual

4-84 System Configuration and Setup
4.4.7.1 Vision System Configuration
 NOTE This option applies to the Genie Camera only.
To access this window, click on the
Configuration tab in the Setup Vision Window.
Command Description
Lookdown Camera
The Lookdown Camera is used to teach fiducials and to program dispense
object locations.
Lookup Camera
The Lookup Camera is used to inspect jet nozzles for fluid residue and may be
used to automatically determine Lookdown Camera to nozzle offsets.
Video Timeout Video Timeout is the normal vision video delivery timeout.
Train Process
Timeout
The Train Process Timeout is the maximum amount of time the vision software is
allowed to train a fiducial to prevent an infinite loop if training fails.
Find Search
Timeout
The Find Search Timeout is the maximum amount of time the vision software is
allowed to find a fiducial to prevent an infinite loop if the find method fails.
Find 2 Search
Timeout
The Find 2 Search Timeout is the maximum amount of time the vision software
is allowed to find a fiducial to prevent an infinite loop if find method 2 fails.
Corner Find Search
Timeout
The Corner Find Search Timeout is the maximum amount of time the vision
software is allowed to find a corner type fiducial to prevent an infinite loop if the
corner find search fails.
Image Resync
Timeout
The Image Resync Timeout is the maximum amount of time, in milliseconds, to
allow the received image frame flushing method to run before returning control to
the application.
Image Resync
Frame Count
The Image Resync Frame Count is the number of NDSNVidVisGenie COM
object received image frames that need to be received to flush the previous
camera images from the digital pipeline queue.
Figure 4-72 Setup Vision Configuration