Owner's manual

4-80 System Configuration and Setup
4.4.7 Vision System Setup
Setup Vision allows you to select the type of Vision System installed on your dispensing system, calibrate
the Vision System, identify the light source, define reticles if desired, and establish parameters for
locating fiducials.
To setup the vision system:
1. In the Main Window, select
Configuration > Setup Vision.
 The Setup Vision window (Figure 4-71) opens.
Figure 4-71 Setup Vision Window
2. Verify that the Vision System and Video Mixer settings are correct.
Dispenser Type Vision System Video Mixer
Spectrum Genie Genie
DispenseMate Genie Genie
Axiom PCVision PCVision
Millennium Cognex PCVision
NOTE Incorrect Vision System or Mixer settings will disable vision system.